How to press DTF Transfers

*PRESSING GUIDELINES *These instructions are a general guide as some heat presses will produce different results. (Please adjust according to the manufacturers guidelines) PLEASE NOTE: Cover Print with a Teflon or Wax sheet for 1st & 2nd press. When peeling the DTF transfer it must be peeled carefully as a hot peel. (Some material may require cold peel – make sure you test)

100% COTTON

  • 150 Degrees Celsius
  • Pre-Press material for 5 seconds
  • Press for 12 seconds (High pressure)
  • Remove DTF Film
  • 2nd press for 10 seconds

POLYESTER

  • 120/130 Degrees Celsius
  • Press for 8 seconds (Med/High pressure)
  • Remove DTF Film
  • 2nd press for 6 seconds

POLYESTER/BLENDS

  • 130/140 Degrees Celsius
  • Press for 10 seconds (Med/High pressure)
  • Remove DTF Film
  • 2nd press for 10 seconds

WASHING INSTRUCTIONS

  • Turn inside out (So print is inside of the garment)
  • Wash at max 40 temp.
  • Do not tumble dry.
  • Use non bio powder/liquid
  • Do not use fabric conditioner
  • Use a cool iron inside-out. Don’t iron the print.